Anping tenglu metal wire mesh co.,ltd.
Quality first,service paramount
Add to Cart
8 mm-1200mm stainless steel knitted mesh liquid and gas filtering
Knitted wire mesh is made of either crochet or knitting of various wire materials including stainless steel, copper, synthetic fiber and other materials.
Knitted wire mesh products are applied to those applications including cryogenic, high temperature, corrosive atmosphere, heat conductive, high usage, or special service applications.
Application:
Filtration,
heat insulation,
shock absorbtion,
anti-vibration,
safety protection,
compressed gaskets,
gas-liquid filters,
noice filters in the automotive,
the other engineering industries.
Grades: 304, 304L, 316, 316L, 310, 310s.
Wire Dia.: 0.08 - 0.50 mm
Width: 8 mm-1200mm
Our knitted wire mesh is made from all material available in wire shapes for processing of the following parts:
Filters Oil and Air Breather Elements Catalytic Converter Mesh Insulator Blanket Mesh Mufflers and Silencers Copper Mesh Oil-Bath Separators Mist Elimination Pads Ground Wire Mesh.
Main Materials Applied for Knitted Mesh: Monel knitted wire mesh has good corrosion resistance in all extreme environments and it is reasonably conductive and is tough with high tensile strength, giving good wear characteristics.
Knitted wire mesh made of tinned copper clad steel has the best shielding performance of all wires used in knitted meshes, combining low contact resistance with a small degree of permeability. It is not suitable for highly abrasive applications where the TIN plating may wear away to expose the copper. The corrosion resistance of tinned copper clad steel knitted wire mesh is suitable for most applications.
Aluminum knitted wire mesh is mechanically weak and will readily take a compression set and this combined with its readiness to form a non-conducting oxide.
Stainless steel knitted mesh is often used as a protective final layer over the other knitted mesh gasket, materials on order to provide a wear-resistant contact surface.
Introduction of knitted wire mesh
| model | Hole amount and width | Wire diameter (mm) | Materials | Weigth(kg/m2) |
| Efficient type | 60-100 | 0.15 | Polypropylene wire | 1/0.7 |
| 70-100 | 0.1*0.3 | Stainless steel wire | 1/0.6 | |
| 80-100 | 0.1*0.3 | Stainless steel wire | 1/0.6 | |
| 90-150 | 0.1*0.3 | Stainless steel wire | 1/0.6 | |
| 200-400 | 0.1*0.3 | Stainless steel wire | 1/0.6 | |
| 60-100 | 0.1*0.5 | Stainless steel wire | 1/0.6 | |
| 80-100 | 0.1*0.5 | Polyamide yarns | 1/0.6 | |
| High weaving type | 20-160 | 0.1*0.4 | Polyamide yarns | 1/0.4 |
| 30-150 | 0.1*0.4 | Stainless steel wire | 1/0.4 | |
| 70-400 | 0.1*0.4 | Stainless steel wire | 1/0.4 |
Anping tenglu metal wire mesh co.,ltd,is a manufacture and exporter of stainless steel wire mesh product.
We are located in wire mesh industrial base Anping city,Hebei province in China.
Our product range is as below,
Stainless steel woven wire mesh
Welded wire mesh
Crimped wire mesh
Hexagonal wire mesh
Knitted wire mesh
Wire mesh filter
Window screen
It have been 15 years that we manufacture and export wire mesh product,our professional responsible attitude and our strictly management technique ensure us standing in the leading position of wire mesh industry.We welcome your enquiry.
In order to make an offer,please provide us below wire mesh specification information.
Material
Wire diameter
Mesh size
Wire mesh length
Wire mesh width
If it is possible,please also provide us weight per roll that you required.